Argon gas filling glasses are more and more welcomed with clients. But do you know what's the advantage for filling argon gas?
After filling the gas, it can be reduced the internal and external pressure difference, maintain the pressure balance, reduce the glass burst caused by the pressure difference, effectively improve the K value of insulating glass, reduce the condensation of indoor side glass and improve the comfort level, that is, the inflated insulating glass is less prone to condensation and frost, but non inflation is not the direct reason of fog. Due to the characteristics of argon as an inert gas, it can slow down the heat convection in the insulating glass and greatly improve its sound insulation and noise reduction effect, which can make the insulating and sound insulation effect of the insulating glass better. After filling argon gas, the strength of large-area insulating glass can be increased, so that the middle will not collapse due to lack of support, and the wind pressure resistance can be increased. Because the dry inert gas is filled, the air with water in the middle cavity can be replaced, so as to keep the environment in the cavity more dry and prolong the service life of molecular sieve in the aluminum spacer frame, When using low - radiation low - E glass or coated glass, because the charged gas is inactive inert gas, it can protect the film layer, reduce the oxidation rate and prolong the service life of coated glass life.